NJM/CLI is one of North America’s top designers and manufacturers of automated packaging systems by enabling installation to be done with minimal disruption to the plant’s production. Both lines were installed as complete turnkey pharmaceutical packaging lines, set up to cover all the steps from bottle orientation to the shrink packing of filled, labeled and capped bottles into four- or six-pack units. NJM/CLI is one of North America’s top designers and manufacturers of pharmaceutical packaging lines by enabling installation to be done with minimal disruption to the plant’s production. Both lines were installed as complete turnkey pharmaceutical packaging lines, set up to cover all the steps from bottle orientation to the shrink packing of filled, labeled and capped bottles into four- or six-pack units.
Automated packaging systems such as Model CF-1220-D dual-head electronic tablet filler are manufactured by Cremer Packaging Technology. NJM/CLI represents Cremer in North America. Normally, the unit has two heads, and bottles are split into lanes as they enter the machine, so that each head serves one lane. Each head has 12 individual Vshaped tracks, for a total of 24 tracks. The machine also is available in a 48-track “Quad” configuration, for greater output. Each head is equipped with a hopper that delivers the tablets to the 12-lane vibrating trays where they are single-filed.
The machine has three trays in series, each set at a slightly faster vibration rate, to optimize tablet separation for counting. Tablets discharge from the 12 channels on the vibrating tray into the scanning unit, where they fall through individual light beams that count them into a closed chute.
Leading the way in innovative automated packaging solutions, NJM/CLI supplies a complete range of value-added packaging and labeling machines, offering single source responsibility for total turnkey line solutions for solid dose products. We can provide you with quality packaging equipment to create automated packaging solutions such as:
- Integrated Turnkey Lines Labeling
- Counting Solid Dose End-of-Line Solutions
- Capping Print & Apply + RFID
- - Customer Focus
We're hard at work with a number of development partners to design automated packaging systems with integrated RF technology that will encode, verify and apply RFID tags at full production speeds. We're out in front of the pack, in part because our versatile Model 400 Print and Apply Labeler can be fitted with the next generation RFID tagging technology".
|
